The A116 is part of Sangoma's family of Advanced Flexible Telecommunications hardware product line - using high performance PCI Express interface, providing superior performance in critical systems all over the world. The A116 supports up to 32.8 Mbps of full duplex data throughput or 480 voice calls using 16 T1/E1/J1 spans.
With Sangoma boards, you can take advantage of hardware and software improvements, as soon as they become available. The A116, like all boards in Sangoma's AFT family, is field-upgradable with our unique unbreakable firmware feature.
Choose the Sangoma A116E and A116DE, equipped with world class DSP hardware to achieve carrier-grade echo cancellation and voice quality enhancement functions for telecommunication systems.
Typical A116 Applications: Call Centers Value-Added Services Large IVR Systems Gateways and Soft Switches
The highest density digital interface board in the market Sixteen spans of T1, E1 or J1 available with carrier-grade hardware echo cancellation. 16 T1/E1 spans with PCI Express interface Double the density of any board on the market today Supports up to 480 simultaneous voice calls Supports up to 32.8 Mbps of full duplex data Asterisk® and FreeSWITCH® ready Easier implementation in Asterisk based PBX systems Support for large Value-Added Services Expand large IVR Systems and Call Centers Easier long term maintenance
Technical Specifications Sixteen T1/E1 ports with optimum PCI-Express interface for high performance voice and data applications Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports so both T1 and E1 are supported simultaneously Support for Asterisk® and FreeSWITCH® Fully compatible with all commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning Dimensions: Full height by half length (107mm x 176mm) Connector: Dense 68 pin SCSI type interface Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available Line decoding: HDB3, AMI, B8ZS Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan) PCI Express Bus Version: 1.1 Power consumption: 2A @ 3.3V, 0.1A @ 12V Temperature range: 0 - 50 °C Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch WANPIPE® routing stack is completely independent of TDM voice application for total system reliability WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25 Impedance: Configurable to 75ohms or 120ohms Optional DSP Hardware Echo Canceller Daughterboard G.168-2002 echo cancellation in hardware 1024 taps/128 ms tail per channel on all channel densities DTMF decoding and tone recognition Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction Does not increase the physical size of the card, and no additional slot is required Operating Systems Windows® 2003, Windows® XP, Windows® Server 2008, Windows® Vista, Windows® 7 Linux (all versions, releases and distributions from 1.0 up) T1/E1 Status Alarms RED: Telco Red Alarm Condition OOF: Out of Frame LOS: Receive Loss of Signal AIS: Alarm Indication Signal RAI: Remote Alarm Indication (Yellow Alarm) Line Protocols Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC Higher Level Protocols IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE,PPPoA, IP over ATM Certification (Pending) FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950, JATE Diagnostic Tools Warranty Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy. Production Quality
Sangoma Digital High Density Card 16 T1/E1