Connect with XmarteK

 

Home
Sangoma A116 16-Span T1/E1/J1
in
Item Code: 
Sangoma A116 16-Span T1/E1/J1

Sixteen spans of T1, E1 or J1 available with carriergrade hardware echo cancellation - the ultimate high-density solution.


The A116 is part of Sangoma's family of Advanced Flexible Telecommunications hardware product line - using highperformance PCI Express interface, providing superior performance in critical systems all over the world.


The A116 supports up to 32.8 Mbps of full duplex data throughout 480 voice calls using 16 T1/E1/J1 spans.

With Sangoma boards, you can take advantage of hardware and software improvements, as soon as they become available. The A116, like all boards in Sangoma's AFT family, is field-upgradable with crash-proof firmware.

Choose the Sangoma A116E and A116DE, equipped with world class DSP hardware to achieve carrier-grade echo cancellation and voice quality enhancement functions for telecommunication systems.

 

Features
Features: 

The Sangoma A116 is the only solution in the market that supports 16 spans in a single board that occupies just one slot in the server.

•16 T1/E1 spans with PCI Express interface.
•Double the density of any board on the market today.
•Supports up to 480 simultaneous voice calls.
•Supports up to 32.8 Mbps of full duplex data.

 

 

Highlights
Highlights: 

Sangoma's A116 board is designed to seamlessly integrate with all telecommunications platforms, either proprietary or open source.

• Asterisk and FreeSWITCH ready.
• Easier implementation in Asterisk based PBX systems.
• Support for large Value-Added Services.
• Expand large IVR Systems and Call Centers.
• Easier long term maintenance.

 

 

Specs
Specs: 

Technical Specifications

•Sixteen T1/E1 ports with optimum PCI Express interface for high performance voice and data applications.

• Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1/E1 are supported simultaneously.

• Support for Asterisk® and FreeSWITCH.

• Fully compatible with all commercially available motherboards - proper PCI-standard interrupt sharing
without manual tuning.

• Dimensions: Full height by half length (107mm x 176mm).

• Connector: Dense 68 pin SCSI type interface
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available.

• Line decoding: HDB3, AMI, B8ZS.

• Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan).

• PCI Express Bus Version: 1.1

• Maximum operational power: 5.5W ( 1.67A @ 3.3V).

• Temperature range: 0-50°C

• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems

• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.

• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.

• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.

• Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned
monosynch or bisynch.

• WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.

• WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25

 

 

Catalog Summary: 
Sangoma Digital High Density Card 16 T1/E1